Goldnote PH-10

the first phono premplifier designed to allow precise adjustments to enjoy the best of your turntable with two separate RCA inputs to connect independently two different tonearms and cartridges. PH-10 is an ultra-versatile phono preamplifier that offers unique features, including EQ CURVES, LOAD and GAIN adjustments: a fully analogue design engineered exclusively with high quality coils, capacitors and resistors. PH-10 is controlled via knob and display using a sophisticated micro-controller to select the functions through our custom firmware that is loaded on a micro SD dedicated flash memory and can be updated easily via PC. The micro-controller is separated and independent from the audio signal path to guarantee always clear and pure sound. Once the tonearms are connected, PH-10 can be set with 4 different GAIN levels [-3dB, 0dB, +3dB, 6dB] to match precisely the output level of any MM or MC cartridge. The perfect setup is guaranteed with 9 different LOAD options [10Ω, 22Ω, 47Ω, 100Ω, 220Ω, 470Ω, 1000Ω, 22KΩ, 47KΩ] that will let you adjust the preamp to match it with a large number of cartridges in a quick, easy way. introducing a new, amazing feature select between 6 equalization curves and experience outstanding performances You will finally be able to switch from the internationally recognized RIAA curve, to the DECCA-LONDON or the AMERICAN-CBS-COLUMBIA curve, always graphically shown on the front display. And there's more, because you will also be able to “enhance” each curve with a modern Gold Note proprietary design for superior dynamic and powerful results. AUDIOPHILE and versatile built in aluminium and designed to elegantly cool down the sophisticated internal electronics PH-10 shows every detail on its 2,8” colour display powered by Gold Note proprietary SKC - Single Knob Control technology – an intuitive control system developed to easily browse and select all the unit's functions. The unit can be externally powered by a dedicated inductive Dual-Mono PSU to enhance even more the performance. Main Details Phono Pre-amplifier with SKC and TFT colour display Equalization Curve control: 3 selectable curves [RIAA - Decca-London - American-Columbia] with enhanced option for each Subsonic filter: 10Hz/36dB octave Frequency response: 20Hz – 20KHz [Enhanced 20Hz – 50KHz] @ +/- 0.3dB THD (Total Harmonic Distortion): <0.05% MAX Signal to noise ratio: -89dB Dynamic response: 105dB Output impedance: 50Ω Weight: 4Kg Dimensions: 220mm W | 80mm H | 260mm D Power Main supply: 100V to 245V ▪ 50/60Hz (depending on market destination, not convertible) Power consumption: 30W super linear power supply Audio Outputs Line output level (fixed): stereo RCA @ 2Volt and balanced XLR @ 4Volt Audio Inputs Analogue inputs: 2 separate independent stereo RCA Input sensitivity: 0.1mV MC up to 7.0mV MM Input impedance: 9 selectable options [10Ω 22Ω 47Ω 100Ω 220Ω 470Ω 1000Ω 22KΩ 47KΩ ] Gain: 65dB MC - 45dB MM with 4 options [-3dB 0dB +3dB +6dB] Upgrades External Class-A tube output stage Dual-Mono External Inductive Power Curve Equalizer Extender unit Class-A Tube Output Stage Gain Stage Enhancer

Write a review

Enter the code in the box below: